CCS Compiler Error - Internal Error - Contact CCS
Bill Kaufman email (remove spam text)
I am building a PIC based terminal with a 40 X 2 Character display and
5 X 4 keypad. This interfaces to a PC through an RS232 port.
I have the keypad and display working fine. I press a key, the proper
character shows up on the display. I was also able to get the same
character out the RS232 port.
As the final stage in development, I attempted to enable interrupt driven
RS232 receives so when a character arrived on the RS232 port, I could
process it to the display. However, when I tried compiling this I received
the following error:
"Internal Error - Contact CCS => Code 20:585:6"
According to the documentation, the error is in linking. I sent the code
to CCS but thought I would ask if anyone has any ideas on this.
http://www.piclist.com hint: The PICList is archived three different
ways. See http://www.piclist.com/#archives for details.
See also: www.piclist.com/techref/index.htm?key=ccs+compiler+error
You must be a member of the
piclist mailing list
(not only a www.piclist.com member) to post to the