On Mon, 29 Jan 2001 12:34:37 +0200, you wrote:
I would be inclined to turn the triac off when the relay is on, to
avoid a triac overheating hazard if the relay fails, especially if the
triac heatsinking (or lack of it) is designed around the short times
for which it will be conducting.
>> > then FIRST turn off the relay, **wait long enough for the relay
>> > contacts to fully open**, and then turn off the triac.
>> > Easy to do with a PIC.
http://www.piclist.com hint: The PICList is archived three different
ways. See http://www.piclist.com/#archives for details.
In reply to: <004901c089df$38d6fde0$5abd1fc4@manager1>
See also: www.piclist.com/techref/microchip/devices.htm?key=pic
You must be a member of the
piclist mailing list
(not only a www.piclist.com member) to post to the