piclist 2001\01\26\064929a >
Thread: 2.5KW Load
face BY : mikeTakeThisOuT@whitewing.co.uk

On Fri, 26 Jan 2001 10:44:09 +0200, you wrote:

>Sorry this is off-topic!
>My pic is connected to a triac optocoupler(MOC3041) that drives a bigger triac (IT615) which is rated at 600V 15Amperes.
>When I switch 2.5KW heater element on at 220Volt the triac(IT615) with heatsink becomes very-very hot. Must I get a higer rated triac or must I look for some other problems?
>I am sure that the pic software don't switch the triac on/off the whole time..It switch on at a certain time and off after a 5minute delay.
If you need small size, low cost, and low heat, a good old-fashioned
relay is still hard to beat!

http://www.piclist.com hint: To leave the PICList

<han27tgnc4r70m2mq7ve8ucprd0b9uha1i@4ax.com> quoted-printable

In reply to: <003701c08774$7f77fd20$52bd1fc4@manager1>
See also: www.piclist.com/techref/microchip/devices.htm?key=pic
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) 2.5KW Load

month overview.

new search...