piclist 2001\01\19\035833a >
Thread: Reading Outputs as Inputs
face BY : Roman Black email (remove spam text)

Bob Ammerman wrote:
{Quote hidden}

I'm surprised at this! With all the professionals
on this list, I have become used to the "never go
outside the spec" attitude, like never exceeding
clock frequency etc. I really don't like the idea
of driving a pin against a voltage source or sink,
at 5v or 0v, this is as bad as driving a pin into
a short circuit - which I wouldn't do either!

Doing it only for "an instruction or two" doesn't
seem to make it any better, it is still so far
out of spec to be scary. I would much prefer to
overclock a PIC at 1.5x its clock freqency than to
do something like this!

http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.

<3A6800CF.61D7@ezy.net.au> 7bit

See also: www.piclist.com/techref/microchip/ios.htm?key=input
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) Reading Outputs as Inputs

month overview.

new search...