piclist 2001\01\14\152445a >
Thread: grounding unused inputs
www.piclist.com/techref/microchip/ios.htm?key=input
face picon face BY : Olin Lathrop email (remove spam text)



> To be "safe", it is best to tie unused input pins to ground [or Vcc,
> doesn't much matter which] *ONLY* through a resistor, rather than
> directly with a short. This is not superstition, as during code
> development it is all too easy to accidentally configure a pin
> intended as input to output. You then run the risk of
> short-circuiting an output.

Perhaps in a low volume product.  I wouldn't want to burden a high volume
product with unnecessary parts for a minor debugging convenience.


*****************************************************************
Olin Lathrop, embedded systems consultant in Devens Massachusetts
(978) 772-3129, olinspam@spam@embedinc.com, http://www.embedinc.com

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.


<000b01c07e67$393fd5f0$260bf6cd@pc> 7bit

See also: www.piclist.com/techref/microchip/ios.htm?key=input
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) grounding unused inputs

month overview.

new search...