Infrared Receiver Module - Pinout please!
Dan Michaels email (remove spam text)
Bala Chandar wrote:
>I have bought an infrared receiver module for remote control experiments
>using 16F84A. But the pinout details are not available. The part number
>seems to be TK69. There is no manufacturer's name or logo on the module.
I am sure there will be immediate flak from several other
piclisters for "suggesting" this, but try hooking it up using
a 1-2K resistor in series with the lead you believe to be +5v.
If correctly connected, the chip probably will function.
If incorrectly connected, the resistor will help protect its
little plastic behind. If there is a queasy feeling in your
stomach, use a larger value R.
may the luck be with you,
- dan michaels
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email mitvma.mit.edu with SET PICList DIGEST in the body listserv
See also: www.piclist.com/techref/index.htm?key=infrared+receiver
You must be a member of the
piclist mailing list
(not only a www.piclist.com member) to post to the