piclist 2001\01\03\170320a >
Thread: Timer 0
face BY : Dan Michaels email (remove spam text)

At 11:43 AM 1/3/01 -0800, you wrote:
> David,
> Enable interrupts (both global and rtcc), and wait for the rollover
> to trigger an interrupt.  Then go in and do the housekeeping, take
> care of whatever it is you want to take care of, do housekeeping to
> renable the interrupts, and exit your interrupt service routine, and
> go back to what you were doing before the interrupt.

Dave, do "exactly" the opposite. Don't enable interrupts [nor
the WDT], but get the stuff running first in polled mode,
only then go to interrupts.

http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics


See also: www.piclist.com/techref/microchip/time.htm?key=time
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) Timer 0

month overview.

new search...