Dan Michaels email (remove spam text)
At 01:05 PM 1/3/01 -0500, you wrote:
>I've set timer0 to run, and I'm polling as follows for the T0IF bit.
> btfss INTCON,T0IF ;Check for timer hitting zero
> goto Comm_Bit_Loop ;If not, then keep looping
>It appears that the int flag is never set.
>Ints are disabled, but I thought I read that the int flag would still be
>set on rollover.
btfss INTCON,T0IF ;Check for timer hitting zero
goto Comm_Bit_Loop ;If not, then keep looping
BTW, don't try this on scenix.
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics
See also: www.piclist.com/techref/microchip/time.htm?key=time
You must be a member of the
piclist mailing list
(not only a www.piclist.com member) to post to the