piclist 2000\11\12\145731a >
Thread: Programmer
www.piclist.com/techref/microchip/devprogs.htm?key=programmer
flavicon
face BY : David VanHorn email (remove spam text)



At 01:43 AM 11/13/00 +1300, Jinx wrote:
>More on the Dark Side -
>
>Simple programmer and fbprg.exe (it's also a Ham Radio page,
>may be of interest to people who like Ham Radio pages)
>
>http://member.netease.com/~tominfo/index.htm


As it happens, I needed a chip programmer yesterday, because I couldn't use
my in-circuit programmer.

I built this one in about 10 minutes, and it works great.

All parts from radio shack.
I used a small project PCB, inserted between the pins of the DB25M
connector, so the whole thing just plugs into my laptop's paralell port.

I haven't had such a nice, simple, and powerful project, since my first
crystal radio :)
Also, his software is very well written, easy to understand.

Pop over to the AVR group at egroups.com, and you can download my "getting
started" code for the 8515. It's adaptable to other processors in the AVR
line.


--
Where's dave? http://www.findu.com/cgi-bin/find.cgi?kc6ete-9

--
http://www.piclist.com hint: To leave the PICList
@spam@piclist-unsubscribe-requestKILLspamspamSTOPspammitvma.mit.edu




<20001112195803.JHIE20067.mail1.rdc1.il.home.com@main>

In reply to: <00c701c04ca6$321b35a0$183661cb@joe>
See also: www.piclist.com/techref/microchip/devprogs.htm?key=programmer
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) Programmer

month overview.

new search...