piclist 2000\07\12\105551a >
Thread: producing front panels
face BY : Bill Colville email (remove spam text)

Date sent:              Wed, 12 Jul 2000 10:31:16 -0400
Send reply to:          pic microcontroller discussion list <PICLISTspamspamMITVMA.MIT.EDU>
From:                   John Walker <jjwKILLspamspamSEI.CMU.EDU>
Subject:                Re: [OT]: producing front panels
To:                     spam_OUTPICLISTspamBeGonespamMITVMA.MIT.EDU

> My favorite way is to print the front panel display onto a clear slide,
> print it in reverse or mirrored this will keep the toner from wiping off
> over time . Then use spray adhesive, I like to use the 3M brand, spray the
> front panel with the adhesive and then CAREFULLY lay the slide on top.
> Smooth it out and trim it up. Use a knife to cut out the holes and
> openings. I have access to a color laser printer which allows for some real
> nice looking panels. Good luck.

I also use this method, although I first print a non-mirrored version
on plain paper and use that as a drilling template. Then you are
sure the mirrored version on the transparency film will be in perfect
alignment. Works great.


http://www.piclist.com hint: To leave the PICList
<200007121501.LAA18736@regulus.blazenet.net> 7BIT

In reply to: <>
See also: www.piclist.com/techref/index.htm?key=producing+front
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) producing front panels

month overview.

new search...