piclist 2000\07\12\103244a >
Thread: producing front panels
www.piclist.com/techref/index.htm?key=producing+front
flavicon
face BY : John Walker email (remove spam text)



My favorite way is to print the front panel display onto a clear slide,
print it in reverse or mirrored this will keep the toner from wiping off
over time . Then use spray adhesive, I like to use the 3M brand, spray the
front panel with the adhesive and then CAREFULLY lay the slide on top.
Smooth it out and trim it up. Use a knife to cut out the holes and
openings. I have access to a color laser printer which allows for some real
nice looking panels. Good luck.


At 04:27 PM 7/12/00 +0200, you wrote:
{Quote hidden}

--
http://www.piclist.com hint: To leave the PICList
piclist-unsubscribe-requestKILLspamspamEraseMEmitvma.mit.edu>
<4.2.0.58.20000712102649.00a8f2b0@pop.sei.cmu.edu>

In reply to: <614FE18146A9D211A2330008C7B0B0E404E58A@UNIVERSE01>
See also: www.piclist.com/techref/index.htm?key=producing+front
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) producing front panels

month overview.

new search...