piclist 2000\06\05\190818a >
Thread: RS232 serial connection between a PIC17C42A and PC
face BY : sertierKILLspam@viosense.com

Hi all!

I would like to read data from the PIC17C42A in-circuit and to send it to a
PC (hyperterminal) via a RS232 connection. I use the PIC's UART. Where can I
find help to realize this connection? I have found some help with
Microchip's web site, and also on the PIC FAQ, but I have never found a
document that would help for both the hardware and the software, and would
explain the serial connection from the beginning to the end.
Thank you very much for your time.
Nathalie SERTIER
Viosense Corporation

2400 Lincoln Avenue
Altadena, CA 91001-5436
phone:   (626) 296 6376
fax:     (626) 296 6371
email:   EraseMEsertierRemoveMEspamKILLspamviosense.com
website: http://www.viosense.com

<NDBBIMBILAFCHIDMACBJKEFJCAAA.sertier@viosense.com> 7bit

See also: www.piclist.com/techref/microchip/ios.htm?key=rs232
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) RS232 serial connection between a PIC17C42A and PC

month overview.

new search...