piclist 2000\06\05\190218a >
Thread: Paralell port powered little device.
face BY : Edson Brusque email (remove spam text)

Hello all,

Arthur Brown wrote:
>Why not take the power from the keyboard conecter or a games port
>40Ma from the printerPort is not easy to do, as some motherboards use open
>collecter outputs if you reduce your Ma request you could take a small
>voltage from unused datapins at the lower ttl high voltage.

   Take power from the keyboard connector seens to be the option. I could
make an adapter using a pair of din connectors and take the signals from pin
4 (GND) and pin 5 (+5VDC/VCC) to power my little gadget. What about using a
pair of resistors (say, 47R)in series with the GND and VCC to limit the
current in case of short-circuit?

   Best regards,


<006201bfcf42$c0373d20$c4a3f7c8@bigbru> 7bit

See also: www.piclist.com/techref/ios.htm?key=port
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) Paralell port powered little device.

month overview.

new search...