piclist 2000\06\05\171432a >
Thread: picprog & ludipipo programmer
www.piclist.com/techref/microchip/devprogs.htm?key=programmer
flavicon
face BY : John Hansen email (remove spam text)



<x-flowed>At 08:08 PM 6/4/00 +0200, you wrote:
>The schematics i have of the lidipipo programmer doesnt mention 16f84
>although it does mention 16c84. Can this programmer handle the 16F84 as well
>??

Yes, it works fine.


>The software the i found for this programmer ( picprog v 0.6 by Tord
>Anderson); is this the lastest and greatest and does it work for a 16F84 as
>well ???

Yes, you might also want to try PIX
(http://home5.swipnet.se/~w-53783/).  While it is a DOS program, it allows
you more control and shows you more information.  PIX is also available at
:  ftp://ftp.tapr.org/picsig/software/   .  In addition, you might want to
try my command line program Pixie.  (at the TAPR site).  It works under
Windows NT (the others won't) because it used API calls to do the
programming.  It also interfaces nicely with MPLAB (because you can call it
as a command line).  Also, the source code is available.  However, it will
not work on all computers.  The problems appear to be
motherboard-specific.  Most computers will run it but some with AMD or
Celeron processors seem to have the biggest problems.   I think this is
because of the motherboard chip set, not the processors themselves.

John Hansen

</x-flowed>
<4.3.1.2.20000605170557.0296fd40@postoffice.cc.fredonia.edu>

In reply to: <NDBBKHALMLBFNHBHBMHECEIICMAA.bbj@plz.co.za>
See also: www.piclist.com/techref/microchip/devprogs.htm?key=programmer
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) picprog & ludipipo programmer

month overview.

new search...