piclist 2000\06\05\121140a >
Thread: External SRAM on PIC (or AVR)
www.piclist.com/techref/microchip/memory.htm?key=sram
flavicon
face BY : Dan Michaels email (remove spam text)



At 05:00 PM 6/5/00 +0100, you wrote:
.......
{Quote hidden}

Mike, yes, I considered that approach too. No good if you want
RS-232 or I2C accessibility. However, for simple counting, PAL
is possible. However, you do need 16 output registers [for 64KB],
8/16 inputs for addressing, and 3-4 control lines.

As far as I can tell this would require 2 24-bit PALs in series,
or else go need to go a gate-array. Got any specific suggestions
along this line? PAL or gate-array?

regards,
- Dan Michaels
==============

<1.5.4.16.20000605095324.209f17f0@lynx.sni.net>

See also: www.piclist.com/techref/microchip/memory.htm?key=sram
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) External SRAM on PIC (or AVR)

month overview.

new search...