Quentin email (remove spam text)
Octavio Nogueira wrote:
> Try to see if the crystal is working. If isn't
> you will get this message.
> Friendly Regards
> Octavio Nogueira
Or use the build in RC osci to test. But not just that.
I get this error on also if the code in the F87x and editor don't match,
also after changing config bits and not reprogramming, etc.
Another suggestion to the problem could be that you use the registers
and program space reserved for ICD. Check your ICD help file to see that
you do not use the ICD resources.
See also: www.piclist.com/techref/microchip/devprogs.htm?key=icd
You must be a member of the
piclist mailing list
(not only a www.piclist.com member) to post to the