Robert A. LaBudde email (remove spam text)
<x-flowed>At 02:58 PM 5/24/00 -0700, ryan wrote:
>I do have snubbers but they need work. Do you have a good
>rule of thumb for design? Most of the books and articles
>that I have read really boil down to "keep trying different
>values 'til it works".
Typical values are 0.1 uF with series 100 ohm.
Robert A. LaBudde, PhD, PAS, Dpl. ACAFS e-mail: lcfltd.comral
Least Cost Formulations, Ltd. URL: http://lcfltd.com/
824 Timberlake Drive Tel: 757-467-0954
Virginia Beach, VA 23464-3239 Fax: 757-467-2947
"Vere scire est per causas scire"
In reply to: <MPBBKGKLOCFAAGJKPIEPGELBDNAA.firstname.lastname@example.org>
See also: www.piclist.com/techref/index.htm?key=120vac+traces
You must be a member of the
piclist mailing list
(not only a www.piclist.com member) to post to the