piclist 2000\05\16\044518a >
Thread: [OT] STRIP-X (enamel wire)
www.piclist.com/techref/index.htm?key=
picon face BY : Joe McCauley email (remove spam text)



As I indicated a soldering iron is how I am doing this at the moment but
with wire as fine as 0.032mm
you can very easily damage the wire. If you are making contacts on a
precisely wound and balanced 5K turn
balanced coil system you cannot afford to loose any wire from the end of the
winding never mind at the start
of the winding. A chemical stripper is the best way to go here IMHO.

Joe

{Original Message removed}
<005701bfbf12$95159780$1c44e286@tcd.ie> 7bit

See also: www.piclist.com/techref/index.htm?key=
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) [OT] STRIP-X (enamel wire)

month overview.

new search...