[EE] 24-bit A/D. Are We in the Twilite Zone Here?
Sean Breheny email (remove spam text)
At 07:48 PM 4/24/00 -0400, you wrote:
>some state it. Some of them have milli-volts of noise (white noise,
>pink, whatever), it is an intrinsic silicon noise, can't be removed,
>can't be filtered, there is NO capacitor can avoid it, stabilize or
>level it. You just need to check the manufacturer document (specs
I don't see why you couldn't low-pass filter the output of the reference?
Prodiving that the thing that is using the ref isn't drawing much current
from it, you could just put a resistor in line and add a low-leakage cap
Even if the thing that needs the reference needs to draw a good deal of
current, you could buffer with a low-noise op-amp and still do the LPF.
| Sean Breheny
| Amateur Radio Callsign: KA3YXM
| Electrical Engineering Student
Save lives, please look at http://www.all.org
Personal page: http://www.people.cornell.edu/pages/shb7
cornell.edu ICQ #: 3329174 shb7
In reply to: <3904DD61.8508C164@ustr.net>
See also: www.piclist.com/techref/io/atod.htm?key=a%2Fd
You must be a member of the
piclist mailing list
(not only a www.piclist.com member) to post to the