Zero Ohm Resistor [OT]
On Fri, 14 Apr 2000 11:23:11 GMT0BST, you wrote:
>I assume you mean why the different power values rather than why
>have zero ohm resistors. In case you are not. They are used for
>links on boards for use with automatic insertion machines, the
>different sizes I'm not so sure about. Check the tolerance. I had
>some zero ohm 5% resistors. They were out of spec, so be carefull
.. The Farnell Catalogue a couple of years ago did actually state a 5%
tolerance on zero ohm resistors.....!
>> Hello.. Just saw that zero ohm resistors are available from Royal Ohm in
>> .125 and .25W varieties..
>> but.. WHY?
Different physical sizes I suspect
In reply to: <E12g3GF-0001QOfirstname.lastname@example.org>
See also: www.piclist.com/techref/index.htm?key=
You must be a member of the
piclist mailing list
(not only a www.piclist.com member) to post to the