500kHz ceramic resonator or 4MHz quartz crystal?
On Thu, 13 Apr 2000 19:19:00 +0100, you wrote:
I think it was probably down to the use of a low frequency resonator
rather than a resonator as such - I've found units below 2MHz to be
rather tempramental. Higher freq ones are fine.
In reply to: <firstname.lastname@example.org>
See also: www.piclist.com/techref/timers.htm?key=resonator
You must be a member of the
piclist mailing list
(not only a www.piclist.com member) to post to the