EEPROM with two (or three) wires interface...
On Mon, 10 Apr 2000 12:47:21 -0400, you wrote:
>Yes, the Atmel serial flash AT49F1614 or AT49F1614T is a 16 MegaBit,
>dual data wide memory (8 or 16 bits), what is perfect.
>It was exactly this flash memory what changed my "desire" to produce an
>IDE interface to 1.44MB floppy disk.
>I am not quite sure about real time voice recording, because the flash
>recording timmings and techniques are not an easy and fast flow, but
>reading would not be a problem.
The Atmel devices do have RAM buffers, and the larger ones have two
buffers, so 'continuous' writing is possible - I think about
30KByte/sec is do-able
In reply to: <38F20599.60A6F0E7@ustr.net>
See also: www.piclist.com/techref/mems.htm?key=eeprom
You must be a member of the
piclist mailing list
(not only a www.piclist.com member) to post to the