piclist 2000\01\05\095629a >
Thread: Panelizing a board
www.piclist.com/techref/index.htm?key=panelizing+board
flavicon
face BY : James Paul email (remove spam text)



Talk to your board house.  There is almost certainly someone
there that has the knowledge and software to panelize a board
for you.  At least here in the Houston area, the board houses
that I've dealt with both personally and professionally have
done this sort of thing for me.  But if you have a 2"x2" board,
and you want to panelize it into 4"x6", you aren't going to have
any waste to cut the boards apart unless this has been taken
into consideration in the border width of the board itself.

                         Good Luck and Regards,

                                 Jim



On Wed, 05 January 2000, Lawrence Lile wrote:

{Quote hidden}

.....jimspam_OUTspamspamjpes.com

<20000105145510.4744.cpmta@c004.sfo.cp.net>

See also: www.piclist.com/techref/index.htm?key=panelizing+board
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) Panelizing a board

month overview.

new search...