piclist 1999\10\28\130104a >
Thread: Measuring Analog Voltages w/o Sharing Grounds
face BY : Maverick email (remove spam text)

Concerning my earlier post concerning instrumentation amps or differential
ADCs, I feel I should mention
after reading Dwayne's post I rethought my assumption that these signals
are all loosely referenced to some theoretical "ground", your
problem was just that there was excessive noise floating around on the
power ground for the circuit that you didn't want
messing up your readings or coupling back into the signals being sensed...

If that isn't the case, pretty much everything I said is meaningless drivel
and just ignore it...

ND Holmes
Nathan D. Holmes   EraseMEmaverickTakeThisOuTspamTakeThisOuTdrgw.net, ndholmes.....spamTakeThisOuTiastate.edu
  122 Shepard #3  Box 328  Gilbert, IA 50105  Iowa State University - EE
  http://www.drgw.net/~maverick   PH: 515-663-9368


In reply to: <4.1.19991028102303.009a92d0@pop.fast.net>
See also: www.piclist.com/techref/microchip/ios.htm?key=analog
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) Measuring Analog Voltages w/o Sharing Grounds

month overview.

new search...