Russell McMahon email (remove spam text)
>Serbus Elvtars Ur!
>Lived on Klauzal Ter in Pest for a while--prior lifetime--early 70's.
>LOTS of good memories!
What / where is this?
>Transverse error is a tough one. It comes from not mounting the die
>exactly square on the substrate--do the math and you will see that even a
>degree can make a real difference! Most people I know that are really
>concerned spend the time with a multi-axis table and calibrate under all
>possible conditions, then set up their data correction algorithms to take
>out the cross axis stuff.
Presumably one could remove this mechnically with vernier alignment of the
sensor module relative to the host product. This may be an abomination
depending on the application.
See also: www.piclist.com/techref/io/sensors.htm?key=sensor
You must be a member of the
piclist mailing list
(not only a www.piclist.com member) to post to the