piclist 1999\10\21\192149a >
Thread: Serial I\O (was Re: TMR0 Latency]
picon face BY : Thomas Brandon email (remove spam text)

Sorry, I didn't make myself quite clear, in MIDI multiple devices are
plugged into a single line, identified by channels. When you plug in a
device, data may already be flowing quite easily, hence, with no mistakes on
your part you are out of synch. True, you can issue a software command to
reset the whole interface but this is not a pleasant thing to do as it will
destroy all MIDI timing.

Apart from that, you are perfectly correct, there is no way to 100% detect
the next stop->start but over time it should 'drift' back. I will have to
check the MIDI specs however, because the limited common combinations may
make faster deteection possible.

{Original Message removed}
<00aa01bf1c1b$7b1c2500$fb255e81@tb> 7bit

See also: www.piclist.com/techref/io/serials.htm?key=serial
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) Serial I\O (was Re: TMR0 Latency]

month overview.

new search...