AD and PIC interfacing problem
Chris Fanning email (remove spam text)
> At 11:50 AM 10/19/99 -0400, Chris wrote:
> >>From what I can tell, you're suggesting to basically connect one end
> >of the electrode to 2.5V. I'd then be running current through the
> >electrode and I'm not sure that's a good thing...
> One point of voltage reference doesn't make a circuit. It is irrelevant
> what the common point signal voltage is, since the pH electrode is not at
> earth ground, and the common signal voltage is not connected to earth ground.
The problem is, the solution conducts. (ie. saltwater) There will
also be other probes that will require different offsets. I'll have
to stick with the instrumentation amplifier configuration for everything
Now I remember why the idea of running current through it bothered me.
In reply to: <email@example.com> from "Robert A. LaBudde" at "Oct 19, 1999 5:28:20 pm"
See also: www.piclist.com/techref/microchip/devices.htm?key=pic
You must be a member of the
piclist mailing list
(not only a www.piclist.com member) to post to the