piclist 1999\08\04\165836a >
Thread: gal-pal-pld programer
www.piclist.com/techref/index.htm?key=gal+pal+pld+programer
flavicon
face BY : Mark Willis email (remove spam text)



WF AUTOMACAO - KITS EDUCACIONAIS NACIONAIS wrote:
>
> felix centeno wrote:
> >
> > Hi friends, have somebody  plans for a gal,pal, or epld programer,
> > or know about a website with its ?
> >
> >     ---------------------------------------------------------------
> > Hi friends, have somebody  plans for a gal,pal, or epld programer,
> > or know about a website with its ?
> >
>
> Needhams has a low cost programmer!
>
> Miguel
> Brasil

I have an EMP-10 and an EMP-20, I like both.  The only thing you want to
be careful of is to not lose the little SIMM cards (for setting up to
program different chips) that come with these;  the 3 regular ones are
available for nominal ($10 each or so) if you misplace them.  Good
support, I'm pretty happy with mine, just wish the other adapters (Like
the PIC programming SIMM cards) weren't $25 or so each for the EMP-20,
and that there was a little niche to store the cards in (I need to make
a box for mine, I think.)  Nice to be able to take one to work & use the
other at home, is why I got the EMP-10 <G>

Their PB-10 is pretty nice, as well, if it'll do what you need,
$140ish.  http://www.needhams.com/pb10devs.asp would tell you if it does
what you need (27C and 28C series ROMs, mostly, so probably not.)

In the interim, if you need a few of something done, ask & I can
probably do it if it takes a #1, 2 or 3 SIMM card on the EMP-10 or
EMP-20.

 Mark

<37A8A946.660B6254@nwlink.com> 7bit

See also: www.piclist.com/techref/index.htm?key=gal+pal+pld+programer
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) gal-pal-pld programer

month overview.

new search...