piclist 1999\02\15\170443a >
Thread: Embedded ethernet card for micros
www.piclist.com/techref/index.htm?key=embedded+ethernet
flavicon
face BY : Mark Willis email (remove spam text)



Andy Kunz wrote:
>
> >  I just wish there was a 10Base2 version available of this, didn't see
> >one (did look but it's been a while.)  The home LAN here is mainly
> >10Base2 (With 2 hubs), for rented/leased situations it seems to work
> >better to run 1 coax than having 15 RJ45 cables strung down the side of
> >the hallway <G>  Guess I just need to move into a warehouse so I can do
> >things the way I want to <G>
>
> Well, if you implement the AUI port  on the board, you can make an
> AUI-to-BNC adapter that will do what you want.
>
> Andy

 Thanks to you & Arjen both <G>  I hadn't thought of that (Very good
thought!), though AUI-10Base2 conversion might be pricey (Haven't
designed one of those yet - always someone else's department <G>), that
would work well - might be a net savings using Coax instead of hubs, if
you had 50 or 60 Ethernet boards in the house, too!

 Mark

<36C87DE6.3D9465CF@nwlink.com> 7bit

See also: www.piclist.com/techref/index.htm?key=embedded+ethernet
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) Embedded ethernet card for micros

month overview.

new search...