Electroluminescent panel power controller.
Eric Smith email (remove spam text)
William Chops Westfield <CISCO.COM> wrote: billw
> Note that there are chips designed just for driving EL displays. Sipex is
> one manufacturer. These apparently use dI/dt type drivers, along with the
> minimal current requiresmenst of EL displays, and achieve high volatges with
> a simple (external) inductor, and a couple of external resistors for timing.
Could one of these be (ab)used into driving the anodes of a small number
of Nixie tubes?
In reply to: <CMM.email@example.com> (message from William Chops Westfield on Fri, 27 Nov 1998 15:39:24 PST)
See also: www.piclist.com/techref/power.htm?key=power
You must be a member of the
piclist mailing list
(not only a www.piclist.com member) to post to the