piclist 1998\10\29\005137a >
Thread: Strobes
face BY : tjaartSTOPspam@wasp.co.za

Alan King wrote:

{Quote hidden}

I've used this with great success on electret mic's. You want
to have good gain, but no tuning. The non-inv input of a
TL074 was hooked to the tail end of an RC network with a
time constant of 2s. The inv input was hooked to the positive
side of the electret. It worked pretty well. If you divide the
non-inv input, you can get away with a single supply and LM324's.

If you want to get really fancy, you can use an intrumentation
op-amp setup with the two inputs taken from the positive and
negative sides of the mic. Use a series resistor between the
negative side of the mic, and ground.

If what I said didn't make sense, tell me, and i'll try again ;)

Friendly Regards

Tjaart van der Walt

|                WASP International                |
|R&D Engineer : GSM peripheral services development|
|SMS KILLspamtjaartEraseMEspamEraseMEsms.wasp.co.za  (160 chars max)|
|     http://www.wasp.co.za/~tjaart/index.html     |
|Voice: +27-(0)11-622-8686  Fax: +27-(0)11-622-8973|
|          WGS-84 : 26¡10.52'S 28¡06.19'E          |

seeking: microchip devices pic

See also: www.piclist.com/techref/microchip/devices.htm?key=pic
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) Strobes

month overview.

new search...