piclist 1998\10\12\021053a >
Thread: how to filter surounding light
face BY : tjaart.....@wasp.co.za

M van der Bilt wrote:

{Quote hidden}

A very effective way around this is to pulse your TX with a say, 25% duty
cycle, and to average the RX side. Use this averaged version to set the
gain and/or the threshold for the RX detect. This method is used in spread
spectrum receivers.

Friendly Regards

Tjaart van der Walt

|                WASP International                |
|R&D Engineer : GSM peripheral services development|
|SMS spamBeGonetjaartspamspamsms.wasp.co.za  (160 chars max)|
|     http://www.wasp.co.za/~tjaart/index.html     |
|Voice: +27-(0)11-622-8686  Fax: +27-(0)11-622-8973|
|          WGS-84 : 26¡10.52'S 28¡06.19'E          |


See also: www.piclist.com/techref/logic/dsps.htm?key=filter
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) how to filter surounding light

month overview.

new search...