piclist 1998\10\07\114715a >
Thread: FR4 PCB
www.piclist.com/techref/pcbs.htm?key=pcb
flavicon
face BY : cousens.....@spamher.forthnet.gr



On some 900 MHz equipment I've seen, they use tuning stubs that
toward the end of the stub are broken by lots of thin lines running
across the width of the stub.
On test just run your soldering iron (to bridge the lines) as far as
necessary,

You could do the same on your cap,
not much good on a 100000 piece run, but for a preproduction run ?


Peter Schultz wrote:
{Quote hidden}

--
Peter Cousens
email: EraseMEcousensKILLspamspam@spam@her.forthnet.gr  phone: + 3081 380534
snailmail:  Folia, Agia Fotini, Karteros, Heraklion  Crete, Greece.

Is it true? that they have, on the new version of windows
managed to increase the MTBF from 95 to 98 minutes
(Thats why they called it 95)

<361B9A63.741C@her.forthnet.gr> 7bit

See also: www.piclist.com/techref/pcbs.htm?key=pcb
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) FR4 PCB

month overview.

new search...