16F84 and I2Cbus devide simulation software
Leo email (remove spam text)
I'm now trying to emulate an PCF8574AP of PHILIPS with a 16F84.
The PCF8574AP is a semi-bidirectional 8 bit expander.
Before to go begin to work I have searched on the net and from colleagues
all information regarding the I2Cbus and its use.
On Mchip application AN554 i2c_test.asm I have found the scheletor to use to
begin to work.
I have also found from a non technician friend a software called IICTV of
PHILIPS, dated 1990 able to simulate on a DOS PC some I2Cbus device for
television use; the program seems able to read and write any kind of I2Cbus
device using a very simple hardware interface.
The I2Cbus interface for the PC is made using one SN7405 and six resistor
on the LPT1 port to generate the SCL and SDA.
I ask to my PIC friends if anyone have esperience on this PHILIPS software??
Exist a recent version? How much cost? Is this software the best tool to
work and debug on PIC & I2Cbus ?
Ciao e saluti.
Da: Peter L. Peres <ACTCOM.CO.IL> plp
A: MITVMA.MIT.EDU < PICLISTMITVMA.MIT.EDU> PICLIST
Data: sabato 3 ottobre 1998 16.00
Oggetto: Re: [OT] Mist maker
>On Sat, 3 Oct 1998, Quentin wrote:
>> The Boss and I were at the garden centre today where I saw a small mist
>> maker. It is a little electric device (size of an ice hockey puc) that
See also: www.piclist.com/techref/i2cs.htm?key=i2c
You must be a member of the
piclist mailing list
(not only a www.piclist.com member) to post to the