piclist 1998\10\03\122103a >
Thread: Mist maker
www.piclist.com/techref/index.htm?key=mist+maker
picon face BY : Peter L. Peres email (remove spam text)



> disc, flowing oil

Actually you don't need that. Simply immerse the disc such that it is
covered by the liquid by 1-10 mm. The pulverisation relies on breaking
cavitation bubbles near the surface. About half the liquid 'around' the
bubbles will become aerosol. Of course if the power is not enough a simple
resonator can be used to raise the local field strength as required (as in
Morgan's tube). In this case the assembly needs to be tuned mechanically
for resonance.

Peter

<Pine.LNX.3.95.981003185621.509G-100000@plp4>

In reply to: <3.0.3.32.19981003154145.007d2c90@olga.swip.net>
See also: www.piclist.com/techref/index.htm?key=mist+maker
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) Mist maker

month overview.

new search...