LCD "busy" signal
Alec Myers email (remove spam text)
>I'm currently working with a 2x16 display and I have opted to not read
>the display and simply wait the maximum time (The application is not
>time critical, so I save one IO). But just to check: You should not read
>the busy flag between the two 4 bit operations, it is only valid after
>the whole operation is completed.
Surely you *have* to read the busy flag between the two 4-bit reads?
'Busy' is bit7 which appears after the first read. After the second,
you're looking at bits 0-3.
It works OK for me like this, anyway.
See also: www.piclist.com/techref/lcds.htm?key=lcd
You must be a member of the
piclist mailing list
(not only a www.piclist.com member) to post to the