piclist 1997\09\11\090650a >
Thread: (Fwd) Re: Cheap Motor drivers [OT]
www.piclist.com/techref/io/motors.htm?key=motor
flavicon
face BY : Lynn Richardson email (remove spam text)



At 04:19 PM 9/10/97 +0000, Lawrence Lile wrote:
>'S ok.  I don't need to handle near that much power.
Maybe you do... measure the motor resistance and calc the 24V current
through it.  I recommend designing for this current as that's what will
happen when you get a locked rotor or if you step from stopped to full
speed.  You can go light on the heat sink if your driver can sense an
overload and shut down.



---------------------------------------------------------------------------
Lynn Richardson - Design Eng.|WA0ZNL            |Progress Instruments, Inc.
DC - 1GHz, RX, TX 100W, PLL  |WA0ZNL.AMPR.ORG   |807 NW Commerce Drive
ASM 6805, 8051, Z8, PIC      |44.46.176.3       |Lee's Summit, MO 64086
C                            |RemoveMElrichRemoveMEspamspam_OUTproginst.com|P(816)524-4442 F 246-4556
<3.0.3.32.19970911080605.007616d4@mail.proginst.com>

In reply to: <21224896801099@toastmaster.com>
See also: www.piclist.com/techref/io/motors.htm?key=motor
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) (Fwd) Re: Cheap Motor drivers [OT]

month overview.

new search...