piclist 1997\09\08\142851a >
Thread: RS232
www.piclist.com/techref/io/serials.htm?key=rs232
flavicon
face BY : Andy Kunz email (remove spam text)



>        Yes, but I have to change the baud rate. I will try with MODE this
>evening. My problem is my plotter, it only has 40 word fifo, and the
>upload soft has to stop when it tells STOP, not a word after, or it will
>be lost. That's the key of the problem :(

What kind of plotter?  I use this with several HP plotters (from A-size
flatbed to DraftPro EXL), and only requirement is hw handshaking.

Sure you got the right cable and MODE settings?

Andy

==================================================================
Andy Kunz - Montana Design - 409 S 6th St - Phillipsburg, NJ 08865
         Hardware & Software for Industry & R/C Hobbies
       "Go fast, turn right, and keep the wet side down!"
==================================================================
<3.0.1.32.19970908113610.006929f4@pop.fast.net>

In reply to: <3413FB21.59E2B600@sdm.bel.alcatel.be>
See also: www.piclist.com/techref/io/serials.htm?key=rs232
Reply You must be a member of the piclist mailing list (not only a www.piclist.com member) to post to the piclist. This form requires JavaScript and a browser/email client that can handle form mailto: posts.
Subject (change) RS232

month overview.

new search...