Searching \ for 'timer and register setup utility' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/timers.htm?key=time
Search entire site for: 'timer and register setup utility'.

Truncated match.
PICList Thread
'timer and register setup utility'
2000\05\18@004250 by David Huisman

flavicon
face
Is anyone interested in a small Windows utility to determine Timer reload
values etc. ie. saves time having to calculate them over again each new
application as crystal changes.
ex. enter xtal frequency and required time and utility will display register
reload values and/or write a portion of code for you that you can past into
editor ?

This will be available for free from my site when done, I am looking for
feedback that could make it more useful or what other repetitive tasks could
be automated.

Regards
David Huisman
Orbit Communications
http://www.orbitcoms.com

2000\05\18@092527 by James Paul

flavicon
face
David,

I'd like a copy of this if you wouldn't mind.   Sounds very useful.


                                         Thanks and Regards,

                                                Jim



On Wed, 17 May 2000, David Huisman wrote:

{Quote hidden}

spam_OUTjimTakeThisOuTspamjpes.com

2000\05\18@100822 by JOSEPH W. BENTZ

flavicon
face
David
   I would appreciate a copy. Thank you.
       Joe
----- Original Message -----
From: David Huisman <.....david.huismanKILLspamspam@spam@ADVMININGTECH.COM.AU>
To: <PICLISTspamKILLspamMITVMA.MIT.EDU>
Sent: Wednesday, May 17, 2000 11:50 PM
Subject: timer and register setup utility


> Is anyone interested in a small Windows utility to determine Timer reload
> values etc. ie. saves time having to calculate them over again each new
> application as crystal changes.
> ex. enter xtal frequency and required time and utility will display
register
> reload values and/or write a portion of code for you that you can past
into
> editor ?
>
> This will be available for free from my site when done, I am looking for
> feedback that could make it more useful or what other repetitive tasks
could
> be automated.
>
> Regards
> David Huisman
> Orbit Communications
> http://www.orbitcoms.com
>

2000\05\18@101858 by D Lloyd

flavicon
face
Hi,

Would it be possible to mail me a copy, too, please?



Kind Regards,
Dan Lloyd

Firmware Engineer, Electronic Operations

2000\05\18@103527 by Milan v.d. Swaluw

flavicon
face
I'm interested, when ready can i have a copy to ?

Milan.

***********************************
Milan v.d. Swaluw, .....pe1ryyKILLspamspam.....amsat.org
Phone: +31-6-29025090
***********************************

2000\05\18@191709 by David Huisman

flavicon
face
OK, there seems to be some interest in this type of utility, I will go ahead
and write it.
If you are interested, email me at EraseMEdavidspam_OUTspamTakeThisOuTorbitcoms.com and when it is
complete I will advise you all and you can download it direct from
http://www.orbitcoms.com

Regards
David Huisman
Orbit Communications
Wireless Data Communications Solutions
NSW
Australia

2000\05\18@233322 by Jon Hylands

flavicon
face
On Fri, 19 May 2000 09:09:40 +1000, David Huisman
<david.huismanspamspam_OUTADVMININGTECH.COM.AU> wrote:

> OK, there seems to be some interest in this type of utility, I will go ahead
> and write it.
> If you are interested, email me at @spam@davidKILLspamspamorbitcoms.com and when it is
> complete I will advise you all and you can download it direct from
> http://www.orbitcoms.com

Check out http://www.kent.net/~boucher/picloops.html

Later,
Jon

--------------------------------------------------------------
  Jon Hylands      KILLspamJonKILLspamspamhuv.com      http://www.huv.com/jon

 Project: Micro Seeker (Micro Autonomous Underwater Vehicle)
          http://www.huv.com

More... (looser matching)
- Last day of these posts
- In 2000 , 2001 only
- Today
- New search...