Post by thread:switching Banks

I am using a PIC 14000 and to preform A/D conversions I have to read/wite bits in certain registers. Some registers are in Bank0 and others are in Bank1. What I need to know is weather I have to switch banks to change these bits and is bank switching accomplised simply by typing BANK0 or BANK1 in the command collum in an .asm file? thanks Scott

BANK0 and BANK1 are macro commans, they bit-set or bit-clear file STATUS at bit #RP0. You can use the bxf STATUS,RP0 or the BANK0/BANK1 to select. I prefer BANKx and the maco becaue I wont mistake it for another STATUS operation and it is clear what I am doing just in the command name. At 07:43 PM 12/18/99 -0500, Scott Beatty wrote: > I am using a PIC 14000 and to preform A/D conversions I have to >read/wite bits in certain registers. Some registers are in Bank0 and >others are in Bank1. What I need to know is weather I have to switch >banks to change these bits and is bank switching accomplised simply by >typing BANK0 or BANK1 in the command collum in an .asm file? > >thanks >Scott > > ----------------------------------------------------------------- Sent from the desk of: Terry Allen Steen, EE spam_OUTengineeringTakeThisOuTmarinapower.com 332 McLaws Circle, Ste 111 757-258-8800 (Voice) Williamsburg, Va 23185 757-258-8805 (FAX) ----------------------------------------------------------------- !I AM A WHALE MAIL USER! If you have a large file to send, goto http://www.whalemail.com send them to: mplengineer Give me your account and I will use it also ----------------------------------------------------------------- Visit our web-site: http://www.marinapower.com -----------------------------------------------------------------