Post by thread:gal-pal-pld programer

part 0 559 bytes <META content=text/html;charset=iso-8859-1 http-equiv=Content-Type> <META content='"MSHTML 4.72.3110.7"' name=GENERATOR> </HEAD> <BODY bgColor=#ffffff> <DIV><FONT color=#000000 size=2>Hi friends, have somebody  plans for a gal,pal, or epld programer,</FONT></DIV> <DIV><FONT color=#000000 size=2>or know about a website with its ?</FONT></DIV> <DIV><FONT color=#000000 size=2></FONT> </DIV></BODY></HTML> </x-html>

felix centeno wrote: > > Hi friends, have somebody plans for a gal,pal, or epld programer, > or know about a website with its ? > > --------------------------------------------------------------- > Hi friends, have somebody plans for a gal,pal, or epld programer, > or know about a website with its ? > Needhams has a low cost programmer! Miguel Brasil

WF AUTOMACAO - KITS EDUCACIONAIS NACIONAIS wrote: > > felix centeno wrote: > > > > Hi friends, have somebody plans for a gal,pal, or epld programer, > > or know about a website with its ? > > > > --------------------------------------------------------------- > > Hi friends, have somebody plans for a gal,pal, or epld programer, > > or know about a website with its ? > > > > Needhams has a low cost programmer! > > Miguel > Brasil I have an EMP-10 and an EMP-20, I like both. The only thing you want to be careful of is to not lose the little SIMM cards (for setting up to program different chips) that come with these; the 3 regular ones are available for nominal ($10 each or so) if you misplace them. Good support, I'm pretty happy with mine, just wish the other adapters (Like the PIC programming SIMM cards) weren't $25 or so each for the EMP-20, and that there was a little niche to store the cards in (I need to make a box for mine, I think.) Nice to be able to take one to work & use the other at home, is why I got the EMP-10 <G> Their PB-10 is pretty nice, as well, if it'll do what you need, $140ish. http://www.needhams.com/pb10devs.asp would tell you if it does what you need (27C and 28C series ROMs, mostly, so probably not.) In the interim, if you need a few of something done, ask & I can probably do it if it takes a #1, 2 or 3 SIMM card on the EMP-10 or EMP-20. Mark

Can "The Engine" programmer be configured to program these devices? James Newton, webmaster http://get.to/techref jamesnewtonKILLspamgeocities.com 1-619-652-0593 phone -----Original Message----- From: pic microcontroller discussion list [.....PICLISTKILLspam.....MITVMA.MIT.EDU]On Behalf Of felix centeno Sent: Friday, July 30, 1999 11:30 PM To: EraseMEPICLISTspam_OUTTakeThisOuTMITVMA.MIT.EDU Subject: gal-pal-pld programer Hi friends, have somebody plans for a gal,pal, or epld programer, or know about a website with its ?

James Newton wrote: > > Can "The Engine" programmer be configured to program these devices? Can't say off hand. Just having a brief look around, and it seems to be a grey area as far as programming info is concerned. -- Best regards Tony "COMING SOON" A Parallax to PIC source code converter. http://www.picnpoke.com Email ???

Tony Nixon wrote: > > James Newton wrote: > > > > Can "The Engine" programmer be configured to program these devices? > > Can't say off hand. > > Just having a brief look around, and it seems to be a grey area as far > as programming info is concerned. ..but the name is clear - PIC'nPAL ! ;) The info on Lattice is pretty good. I have it somewhere... -- Friendly Regards /"\ \ / Tjaart van der Walt X ASCII RIBBON CAMPAIGN tjaartspam_OUTcellpt.co.za / \ AGAINST HTML MAIL |--------------------------------------------------| | GSM Technology for Positioning and Telematics | | Cellpoint Systems SA http://www.cellpt.com | | http://www.wasp.co.za/~tjaart/index.html | | WGS84 -26.0124 +28.1129 Voice +27 (0)11 2545100 | |--------------------------------------------------|