'freq out using 16c58a'
Is my understanding correct? Or am I unable to
output a frequency to a prot bit, based on an interger divisor of clock/
from the timer by just setting up some registers?
I've been looking at this for a day or so, and it seems that
if I want to have a frequency output from the timer than there is
no way to program a port for "rollover" of the counter.
Hopefully I'm missing something here, but maybe not.
Brad Mitchell <MITVMA.MIT.EDU> wrote: PICLIST
> Is my understanding correct? Or am I unable to
> output a frequency to a prot bit, based on an interger
> divisor of clock/4 from the timer by just setting up some
Sorry... You can't do that with any of the 16C5x parts. If you use a
16C58, your software will have to manually poll the RTCC/TMR0 register
and toggle the port pin whenever it sees a rollover.
Andrew Warren - ix.netcom.comfastfwd
Fast Forward Engineering, Vista, California
More... (looser matching)
- Last day of these posts
- In 1996
, 1997 only
- New search...