Searching \ for 'circuit simulation' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/index.htm?key=circuit+simulation
Search entire site for: 'circuit simulation'.

Truncated match.
PICList Thread
'circuit simulation'
1996\05\14@205249 by Stuart Allman

flavicon
face
I am working on a project where I need to simulate the timing of a depletion
NMOS inverter.  I don't have any information on how to use the paramters in
my Pspice .model statement.  So far I have...

.model <modelname> NMOS(LAMBDA = 0.0, ......

What other parameters are available?

Thanks,
Stuart Allman
Studio Sound Design
spam_OUTstudioTakeThisOuTspamhalcyon.com

1996\05\15@073257 by Thomas Coonan

flavicon
face
>.model <modelname> NMOS(LAMBDA = 0.0, ......
Wow, it's been a while for me..  I have all this at home.  I've had to simulate
a CMOS inverter in SPICE to get the delays.  Do you need both PMOS and NMOS, for
CMOS or are you modelling pure NMOS and using a fixed resistor pull-up?

.....Thomas.CoonanKILLspamspam@spam@Sciatl.com

1996\05\26@143516 by Claus K|hnel

flavicon
face
>I am working on a project where I need to simulate the timing of a depletion
>NMOS inverter.  I don't have any information on how to use the paramters in
>my Pspice .model statement.  So far I have...
>
>.model <modelname> NMOS(LAMBDA = 0.0, ......
>
>What other parameters are available?
>
>Thanks,
>Stuart Allman
>Studio Sound Design
>studiospamKILLspamhalcyon.com
>
Stuart,

please send me your fax number, so I would send you three pages from a book
about the test version of the Design Center for Windows.

Ciao, Claus
===========================================================================
Dr. Claus KŸhnel                                    Tel/Fax +41 1 785 02 75
Consulting & Distribution                     E-Mail  .....kuehnelKILLspamspam.....dial.eunet.ch
                                                    EraseMEckuehnelspam_OUTspamTakeThisOuTaccess.ch
===========================================================================

1996\05\27@120410 by Stuart Allman

flavicon
face
At 08:34 PM 5/26/96 +0200, you wrote:
>>I am working on a project where I need to simulate the timing of a depletion
>>NMOS inverter.  I don't have any information on how to use the paramters in
>>my Pspice .model statement.  So far I have...
>>
>>.model <modelname> NMOS(LAMBDA = 0.0, ......

Thanks for the reply.  They went over the parameters in my microelectronics
class.  Now if only I could afford the real version of the program.

Stuart Allman
Studio Sound Design
studiospamspam_OUThalcyon.com

More... (looser matching)
- Last day of these posts
- In 1996 , 1997 only
- Today
- New search...