'Weak pullups PORTB'
part 0 16 bytes
Robert A. LaBudde
|<x-flowed>At 05:19 PM 4/26/00 +0100, you wrote:
>Can anyone help? I have been using the 16C84 and lately 16F84 for a couple
>of years no problems with PORTB weak pullups. I am moving up to the 16F876
>and can't get them to work. The port seems unreliable as an input as it
>floats about. Using a DVM I measure 1.8volts to ground.
>I have a 16F877 which works fine with my code and believe that I am
>treating the pages correctly when setting up the option and tris registers.
>Anyone got a bit of code for setting RBPU up correctly?
Turn off the Low Voltage Programming.
Robert A. LaBudde, PhD, PAS, Dpl. ACAFS e-mail: lcfltd.comral
Least Cost Formulations, Ltd. URL: http://lcfltd.com/
824 Timberlake Drive Tel: 757-467-0954
Virginia Beach, VA 23464-3239 Fax: 757-467-2947
"Vere scire est per causae scire"
More... (looser matching)
- Last day of these posts
- In 2000
, 2001 only
- New search...