Searching \ for 'Unprotecting a flash part' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/mems.htm?key=flash
Search entire site for: 'Unprotecting a flash part'.

Truncated match.
PICList Thread
'Unprotecting a flash part'
2000\03\09@101019 by John Gerthoffer

flavicon
face
I have accidentally set the code protection on my 16F873.  Doe anyone know
how to reverse my mistake.  (I know one way, but I don't want to fire up my
soldering iron yet.)

2000\03\09@103930 by Octavio Nogueira

flavicon
face
No problem, every programmer should be able to
unprotect a flash part. ProPic 2 does!

Friendly Regards

Octavio Nogueira
===================================================
spam_OUTnogueiraTakeThisOuTspampropic2.com                  ICQ# 19841898
ProPic tools - low cost PIC programmer and emulator
http://www.propic2.com
===================================================
-----Mensagem Original-----
De: "John Gerthoffer" <.....jgerthofferKILLspamspam@spam@AAMATRIX.COM>
Para: <PICLISTspamKILLspamMITVMA.MIT.EDU>
Enviada em: Quinta-feira, Março 09, 2000 12:05
Assunto: Unprotecting a flash part


> I have accidentally set the code protection on my 16F873.  Doe anyone know
> how to reverse my mistake.  (I know one way, but I don't want to fire up
my
> soldering iron yet.)

2000\03\09@121803 by Jim Robertson

flavicon
face
At 10:05 AM 3/9/00 -0500, you wrote:

MPLAB/picstart plus will remove the code protection automatically next time
you program the part. No need to worry.

Jim

>I have accidentally set the code protection on my 16F873.  Doe anyone know
>how to reverse my mistake.  (I know one way, but I don't want to fire up my
>soldering iron yet.)
>
Regards,

Jim Robertson
NEWFOUND ELECTRONICS
________________________________________
Email: .....newfoundKILLspamspam.....pipeline.com.au
http://www.new-elect.com
MPLAB compatible PIC programmers.
________________________________________

2000\03\09@122800 by John Gerthoffer

flavicon
face
Jim,

I just read in section 28.8 of the PICmicro MID-RANGE MCU FAMILY manual that
you are correct.  However, I must have hosed the chip somehow, cause it
ain't working.

John G


{Original Message removed}

More... (looser matching)
- Last day of these posts
- In 2000 , 2001 only
- Today
- New search...