Post by thread:Thanks

Thanks, I'll give it a try. At this point I'm willing to try anything. Ken Dougal Lauw Lim Un Tung wrote: {Quote hidden}> > Connect your mouse on Com2 IRQ3, and set your modem on Com3 IRQ4. > Your Com1 is free now ... you can connect it to your programmer > (of course you can not program your hardware while you make connection > with modem) > > _______________________________ > > Lauw Lim Un Tung > Pecindilan 5/14 > Surabaya 60273 > INDONESIA > phone : 62-31-318895 > e-mail : spam_OUTtungTakeThisOuTpeter.petra.ac.id > _______________________________ >

Whew ! Thanks to all those that replied re: the "RS485 Multi Master" and the "9600 Baud" topics I posted in last few days. I'll sit down & digest it all then decide what to do. All very interesting replies. I hope that I can return the favour sometime with a topic I know something about ! :-) Thanks again. ______________________________________ Dave Duffy, Audio Visual Devices 8/9-11 Trade Street Cleveland Qld 4163, Australia Ph: +61 7 38210362 Fax: +61 7 38210281 E-mail: .....AVDKILLspam@spam@mailbox.uq.edu.au ______________________________________

I want to thank everyone who provided advice for dealing with hooking up the PICSTART Plus to a com port. Will probably use the PS\2 approach. Again thank you, Bob Sickler

Thanks for the info on the Technology Company. Does anyone know of one place where I can purchase Easy PICN Beginner's Guide and a Unipolar STepper MOtor Controller Bonnie