'Strange behavior 12CE519'
Dr. Imre Bartfai
Hi friends, I have the following problem: I need to store some
configuration data (actually an iButton serial number) in the E2PROM of
the 12CE519. I use the program fragment recommended by Microchip
(fl51x...). I have experienced if the particular byte to be stored is
somewhat higher (I guess if it exceeds 80h), the data I read out latter is
0FFh. I did as workaround that I split every bytes into 2 nibbles -> 2
bytes, higher nibble is zeroed. Then it works, but it is
storage-inefficient method. Any hints/suggestions are welcome.
P.S: I use actually the same routine to handle the E2PROM of 16CE625,
without any problem.
More... (looser matching)
- Last day of these posts
- In 1999
, 2000 only
- New search...