'Software work required'
I am looking for Help in debuging/finishing a program for
The program has interupt driven time, uart, display & key
scan; with background command interpritation, S.W. I2C
master access to a memory & a video IC. This is destind for
a commercial product.
I would like to find a person (in South Australia if possable)
who can assist in this project.
Blocks of the code may be made available for general
interest/use once the project is up and running.
We would like to speed up time to market.
Please contact my self Peter Wintulich at Microbits
Voice: 08) 8362 9220
|Peter Wintulich wrote:
> I am looking for Help in debuging/finishing a program for
> snip ------
> I would like to find a person (in South Australia if possable)
> who can assist in this project.
> Blocks of the code may be made available for general
> interest/use once the project is up and running.
I have a page called "DonTronics Meeting Place" which can be found at:
It's for MicroChip PIC Hardware Designers/Software Authors. Prefer
as most of my requests for assistance come from the locals, but not a
definite requirement. It may well be a consideration if an exchange of
phone calls and faxes is required, or prototyping hardware needs to be
delivered or demonstrated.
This page is for people looking for designers, and people who can do
This can be software and/or hardware. It isn't a forum for advertising a
product, however products supplied by an individual or Company may be
mentioned in the text.
Currently there isn't any one listed in South Australia, but perhaps one
of the people listed may be able to assist if you are up against it.
Send a blank message to dontronics.com for more info. help
SLI, the serial LCD that auto detects baud rates from 100 to 125K bps.
SimmStick(tm) A PIC proto PCB the size of a 30 pin Simm Memory Module.
Does anyone know of a "Meeting Place" web site in/for the United States
like Don McKenzie has in Australia?
Don McKenzie wrote:
More... (looser matching)
- Last day of these posts
- In 1997
, 1998 only
- New search...