Post by thread:Sensing RC receiver impulses

In message <spam_OUT9511181505.aa09606TakeThisOuTpunt-4.mail.demon.net> .....PICLISTKILLspam@spam@MITVMA.MIT.EDU writes: > Hi, I am looking for just a link, I am currently modifing my son's toy > school bus with a motor and lights... I was looking at infrared to control > it. Perhaps what you have can also do the trick. Please EMAIl me the details > to davidwKILLspamggx.com. If it's any help, I'm currently writing software for the 16C84 to receive and decode IR from the current Sharp Electronics remote controls. So far I'm able to reliably receive the signals and turn LED's on accordingly. To receive the IR I'm using a small IR receiver IC from a TV, this has three connections, positive supply, earth, and data out. If you are interested please feel free to contact me. Nigel. /----------------------------------------------------------\ | Nigel Goodwin | Internet : .....nigelgKILLspam.....lpilsley.demon.co.uk | | Lower Pilsley | | | Chesterfield | | | England | | \----------------------------------------------------------/

On Sat, 18 Nov 1995, Nigel Goodwin wrote: > In message <EraseME9511181505.aa09606spam_OUTTakeThisOuTpunt-4.mail.demon.net> PICLISTspam_OUTMITVMA.MIT.EDU > writes: > > Hi, I am looking for just a link, I am currently modifing my son's toy > > school bus with a motor and lights... I was looking at infrared to control > > it. Perhaps what you have can also do the trick. Please EMAIl me the details > > to @spam@davidwKILLspamggx.com. > > If it's any help, I'm currently writing software for the 16C84 to receive and > decode IR from the current Sharp Electronics remote controls. So far I'm able > to reliably receive the signals and turn LED's on accordingly. To receive the > IR I'm using a small IR receiver IC from a TV, this has three connections, > positive supply, earth, and data out. If you are interested please feel free > to contact me. > > Nigel. > Just a pointer to a good source on information on IR remote control (I hope i can read my own writing ) hemul.nada.kth.se /home/d89-bga/hp/files/remote/rem32bg This contains code for the IR port of an hp48 but lots of info on ways of coding THE IR signal for a lot of makers, well worth a check for those interested in IR remote control. /Sten --- Sten Dahlgren CelsiusTech Systems ! "I'd rather have 39 Hp under my arm S-175 88 Jaerfaella Sweden ! than one under my backside" KILLspamsedaKILLspamcelsiustech.se +46-8 58084430 ! join your nearest karting club now !!