Searching \ for '[SX] SX and Web Server' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/ubicom/devices.htm?key=sx
Search entire site for: 'SX and Web Server'.

Exact match. Not showing close matches.
PICList Thread
'[SX] SX and Web Server'
2005\08\17@160314 by johncouturen/a

flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, johncouture wrote:

The datasheet for the SX 52 mentions "examples of Virtual Peripheral modules are ... Internet Connectivity protocols such as UDP, TCP/IP stack, HTTP, SMTP, POP3" ... (ref: 4, sec 1.3.1)

Does anyone know of an existing web server software package that can be downloaded into the SX?  (free would even be sweeter!)


John J. Couture
San Diego Miramar College.

---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=84733
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2005 (http://www.dotNetBB.com)

2005\08\17@163030 by peterverkaikn/a

flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, peterverkaik wrote:

http://www.sxlist.com/techref/ubicom/virtperf.htm
Scroll down for SX stack. Requires SX52.

regards peter
---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=84733#m84737
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2005 (http://www.dotNetBB.com)

2005\08\18@135138 by johncouturen/a

flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, johncouture wrote:

Thank you Peter!  That was perfect!

John J. Couture
San Diego Miramar College
---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=84733#m84830
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2005 (http://www.dotNetBB.com)

2005\08\18@190123 by kgraceyn/a

flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, kgracey wrote:

Anybody ever made use of this application?

Any working devices out there?

Ken Gracey
Parallax, Inc.

---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=84733#m84862
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2005 (http://www.dotNetBB.com)

2005\08\19@003030 by peterverkaikn/a

flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, peterverkaik wrote:

Ken,
I have the SX-Stack Evaluation Kit, which has a SX52BD datecode AB0011AB,
preprogrammed with iSX embedded webserver version 1.0.4
(at sxlist.com is version 2.3.5)
This does work using win98.

There are a few support files (schematics etc.) that are not at sxlist.com
I could upload this (total zipped is 2.53 MB)
regards peter
---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=84733#m84884
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2005 (http://www.dotNetBB.com)

2005\08\19@041752 by g_daubachn/a

flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, g_daubach wrote:

Several years ago, I tried to use an SX52 for sending automated eMails via SMTP containing the system status of an appliance to a server. I used a slightly modified version of the Ubicom (still Scenix at that time) sample code. In general, it worked. The only problem was that the code for handling the eMail stuff was so large that there was almost no free program memory for application-specific code. At that time, I was thinking of using two SXes, one handling the eMail part, and the other the applicaiton-specific tasks, using a simple protocol for the inter-SX communication. I never finished this application because my customer finally decided to use some other solution.

IMO, the lack of enough free program memory was one of the reasons why Scenix/Ubicon developed the IP series of controllers then.

---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=84733#m84886
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2005 (http://www.dotNetBB.com)

2005\08\19@083615 by johncouturen/a

flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, johncouture wrote:

Guenther,
Do you think attaching additional I2C memory to the mix would solve the problem?

---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=84733#m84932
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2005 (http://www.dotNetBB.com)

2005\08\19@131540 by g_daubachn/a

flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, g_daubach wrote:

John,
I don't think so. You can use a serial EEPROM to store tables or other contstants but no program code (unless you have some p-code interpreter running on the SX, like the BASIC Stamps do). Code for reading/writing the serial EEPROM, e.g. via IC would "eat up" extra space in the SX program memory.

To be honest, I did not focus on that topic since a long time - if there are others lurking with more practical experience please bail in and shere your opinions and experiences, you are welcome. This IS an interesting topic!

---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=84733#m84985
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2005 (http://www.dotNetBB.com)

2005\08\19@145001 by peterverkaikn/a

flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, peterverkaik wrote:

Took a little longer, because the sources from sxlist.com would not assemble using the latest SASM. In fact they contain errors: skip instruction followed by compound statements. I fixed those errors.

Also found a appnote AN23 that describes a setup using a SX28 for UDP messages.

I altered the iSXv1_0_4.src to make it assemble using a SX28, according to the schematic in the AN23 document. (iSX_udp_for_sx28 folder).

At the Ubicom site, entering support, the documents describing the iSX and eSX sources are not available, and I could not find them at sxlist.com also, but they are, together with the fixed sources, in the zips.

Unzip both attachements to the same folder.

regards peter
---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=84733#m85002
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2005 (http://www.dotNetBB.com)

2005\08\19@155609 by PJMontyn/a

flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, PJMonty wrote:

Peter,

Glad to hear the "Compound statment following skip" warning I added to the IDE paid off.  I added that one day after working on a project where I got burned by that problem.  This is one of the advantages of me using the SxKey IDE as well as writing it.  If I was just a hired gun, I would never even know to add a feature like that, let alone get inspired (annoyed) enough to do it right then and there.

[list]Thanks,
PeterM[/list]
---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=84733#m85011
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2005 (http://www.dotNetBB.com)

2005\08\19@182423 by James Newtonn/a

flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, James Newton wrote:

Thank you Peter.

I've updated everything on the sxlist.com web page.

---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=84733#m85031
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2005 (http://www.dotNetBB.com)

2005\08\19@233105 by peterverkaikn/a

flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, peterverkaik wrote:

Thanks James.

You may want to provide a link to the SX specific tcp/ip i/o page on the Virtual Peripherals page (at VP sx stack). I really had to search those updates.

regards peter
---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=84733#m85069
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2005 (http://www.dotNetBB.com)

2005\08\23@214641 by johncouturen/a

flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, johncouture wrote:

James and Parallax <-----
James, on your opening page you have a link labeled "Intro to IO control with the SX Microcontroller" which links to to a Parallax document that is no longer produced (stock# 45402).  I think Mr. Alvarez said that it is now incorporated into the new 3.0 manual (http://www.parallax.com/dl/docs/books/ExploringTheSx.pdf ) Unit 9, pg 135.  Did I get all of the references correct so that you two can update the links (grin).

---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=84733#m85550
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2005 (http://www.dotNetBB.com)

2005\08\24@132845 by James Newtonn/a

flavicon
face
In SX Microcontrollers, SX/B Compiler and SX-Key Tool, James Newton wrote:

Thanks for letting me know...I've removed the link
---------- End of Message ----------

You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=84733#m85639
Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com
The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2005 (http://www.dotNetBB.com)

More... (looser matching)
- Last day of these posts
- In 2005 , 2006 only
- Today
- New search...